/*
** Astrolog (Version 7.00) File: xscreen.cpp
**
** IMPORTANT NOTICE: Astrolog and all chart display routines and anything
** not enumerated below used in this program are Copyright (C) 1991-2020 by
** Walter D. Pullen (Astara@msn.com, http://www.astrolog.org/astrolog.htm).
** Permission is granted to freely use, modify, and distribute these
** routines provided these credits and notices remain unmodified with any
** altered or distributed versions of the program.
**
** The main ephemeris databases and calculation routines are from the
** library SWISS EPHEMERIS and are programmed and copyright 1997-2008 by
** Astrodienst AG. The use of that source code is subject to the license for
** Swiss Ephemeris Free Edition, available at http://www.astro.com/swisseph.
** This copyright notice must not be changed or removed by any user of this
** program.
**
** Additional ephemeris databases and formulas are from the calculation
** routines in the program PLACALC and are programmed and Copyright (C)
** 1989,1991,1993 by Astrodienst AG and Alois Treindl (alois@astro.ch). The
** use of that source code is subject to regulations made by Astrodienst
** Zurich, and the code is not in the public domain. This copyright notice
** must not be changed or removed by any user of this program.
**
** The original planetary calculation routines used in this program have
** been copyrighted and the initial core of this program was mostly a
** conversion to C of the routines created by James Neely as listed in
** 'Manual of Computer Programming for Astrologers', by Michael Erlewine,
** available from Matrix Software.
**
** Atlas composed using data from https://www.geonames.org/ licensed under a
** Creative Commons Attribution 4.0 License. Time zone changes composed using
** public domain TZ database: https://data.iana.org/time-zones/tz-link.html
**
** The PostScript code within the core graphics routines are programmed
** and Copyright (C) 1992-1993 by Brian D. Willoughby (brianw@sounds.wa.com).
**
** More formally: This program is free software; you can redistribute it
** and/or modify it under the terms of the GNU General Public License as
** published by the Free Software Foundation; either version 2 of the
** License, or (at your option) any later version. This program is
** distributed in the hope that it will be useful and inspiring, but
** WITHOUT ANY WARRANTY; without even the implied warranty of
** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
** General Public License for more details, a copy of which is in the
** LICENSE.HTM file included with Astrolog, and at http://www.gnu.org
**
** Initial programming 8/28-30/1991.
** X Window graphics initially programmed 10/23-29/1991.
** PostScript graphics initially programmed 11/29-30/1992.
** Last code change made 6/4/2020.
*/

#include "astrolog.h"


#ifdef GRAPH
/*
******************************************************************************
** Astrolog Icon.
******************************************************************************
*/

#ifdef X11
/* This information used to define Astrolog's X icon (ringed planet with */
/* moons) is similar to the output format used by the bitmap program.    */
/* You could extract this section and run xsetroot -bitmap on it.        */

#define icon_width 48
#define icon_height 48
CONST uchar icon_bits[] = {
 0x0e,0x00,0x00,0x00,0x10,0x00,0x7f,0x00,0x00,0x00,0x00,0x00,0xff,0x01,0x00,
 0x02,0x00,0x00,0xff,0x43,0x00,0x00,0x00,0x00,0xfe,0x0f,0x00,0x00,0x02,0x00,
 0x9e,0x1f,0x00,0x00,0x00,0x10,0x1e,0x7c,0xc0,0x03,0x00,0x38,0x3c,0xf8,0x7e,
 0x7d,0x00,0x10,0x3c,0xe0,0xab,0xaa,0x00,0x00,0x38,0xc0,0x5f,0x05,0x03,0x00,
 0x70,0x60,0xb5,0x12,0x04,0x00,0xf0,0xf8,0x5f,0x85,0x18,0x0e,0xe0,0xf8,0xaa,
 0x2a,0x90,0x33,0xc0,0xfd,0x5f,0x05,0xe0,0x47,0xc0,0xbf,0xb5,0x52,0xc0,0x4b,
 0x80,0xff,0x5f,0x05,0xc0,0x85,0x00,0xff,0xaa,0x2a,0x80,0x83,0x80,0xff,0x5f,
 0x05,0x00,0x87,0x80,0x7f,0xb5,0x92,0x00,0x4b,0x80,0xff,0x5f,0x05,0x00,0x45,
 0x80,0xff,0xaa,0x2a,0x00,0x33,0x80,0xff,0x5f,0x05,0x00,0x0f,0xc0,0xff,0xb5,
 0x52,0x00,0x02,0xc0,0xff,0x5f,0x05,0x00,0x02,0xc1,0xff,0xab,0x2a,0x00,0x02,
 0xe0,0xff,0x5f,0x05,0x00,0x02,0x38,0x5f,0xbf,0x92,0x00,0x01,0x58,0xfe,0x5f,
 0x05,0x00,0x81,0xbc,0xfc,0xbe,0x2a,0x00,0x01,0x7c,0xfc,0x7f,0x05,0x00,0x01,
 0x3c,0xbc,0xf5,0x52,0x00,0x01,0x58,0xfe,0xff,0x05,0x80,0x00,0xb8,0xff,0xea,
 0x2b,0xc0,0x01,0xe0,0xfe,0xdf,0x0f,0xc0,0x23,0x00,0x5c,0xb5,0x9f,0xa0,0x03,
 0x00,0xf8,0x5f,0x3d,0x10,0x07,0x00,0xf8,0xaa,0xfa,0x18,0x0f,0x08,0xe0,0x5f,
 0xf5,0x05,0x0e,0x1c,0xc0,0xb5,0xea,0x03,0x1c,0x08,0x00,0x5f,0x85,0x07,0x3c,
 0x00,0x00,0xbe,0x7e,0x1f,0x3c,0x00,0x10,0xc0,0x03,0x3e,0x78,0x00,0x00,0x00,
 0x00,0xf8,0x79,0x00,0x00,0x00,0x00,0xf0,0x7f,0x00,0x00,0x20,0x00,0xc0,0xff,
 0x00,0x00,0x00,0x00,0x82,0xff,0x00,0x00,0x00,0x00,0x00,0xfe,0x40,0x00,0x00,
 0x00,0x00,0x70};
#endif


/*
******************************************************************************
** Interactive Screen Graphics Routines.
******************************************************************************
*/

/* Set up all the colors used by the program, i.e. the foreground and   */
/* background colors, and all the colors in the object arrays, based on */
/* whether or not we are in monochrome and/or reverse video mode.       */

void InitColorsX()
{
  int i;
  flag fInverse = gs.fInverse;
#ifdef X11
  char sz[cchSzDef];
  Colormap cmap;
  XColor xcol;
  KV kv;

  if (!gi.fFile) {
    cmap = XDefaultColormap(gi.disp, gi.screen);

    /* Allocate colors from the present X11 colormap. Given strings like */
    /* "magenta", allocate these colors and determine their values.      */

    for (i = 0; i < cColor; i++) {
      kv = rgbbmp[i];
      sprintf(sz, "#%02x%02x%02x", RGBR(kv), RGBG(kv), RGBB(kv));
      XParseColor(gi.disp, cmap, sz, &xcol);
      XAllocColor(gi.disp, cmap, &xcol);
      rgbind[i] = xcol.pixel;
    }
  }
  if (!gi.fFile) {
    XSetBackground(gi.disp, gi.gc,   rgbind[gi.kiOff]);
    XSetForeground(gi.disp, gi.pmgc, rgbind[gi.kiOff]);
  }
#endif

#ifdef WIN
  /* Don't print on a black background unless user really wants that. */
  if (wi.hdcPrint != NULL && us.fSmartSave)
    fInverse = fTrue;
#endif

  gi.kiOn   = kMainA[!fInverse];
  gi.kiOff  = kMainA[fInverse];
  gi.kiLite = gs.fColor ? kMainA[2+fInverse] : gi.kiOn;
  gi.kiGray = gs.fColor ? kMainA[3-fInverse] : gi.kiOn;
  for (i = 0; i <= 8; i++)
    kMainB[i]    = gs.fColor ? kMainA[i]    : gi.kiOn;
  for (i = 0; i <= cRainbow; i++)
    kRainbowB[i] = gs.fColor ? kRainbowA[i] : gi.kiOn;
  for (i = 0; i < cElem; i++)
    kElemB[i]    = gs.fColor ? kElemA[i]    : gi.kiOn;
  for (i = 0; i <= cAspect; i++)
    kAspB[i]     = gs.fColor ? kAspA[i]     : gi.kiOn;
  for (i = 0; i <= cObj; i++)
    kObjB[i]     = gs.fColor ? kObjA[i]     : gi.kiOn;
  for (i = 0; i <= cRay+1; i++)
    kRayB[i]     = gs.fColor ? kRayA[i]     : gi.kiOn;
}


#ifdef WCLI
/* Window event processor for the Windows CLI version. Most event */
/* processing happens inside the InteractX() message loop.        */

LRESULT API WndProcWCLI(HWND hwnd, UINT wMsg, WPARAM wParam, LPARAM lParam)
{
  wi.hwnd = hwnd;
  switch (wMsg) {

  /* The window has been resized. Change the chart size if need be. */
  case WM_SIZE:
    wi.xClient = gs.xWin = LOWORD(lParam);
    wi.yClient = gs.yWin = HIWORD(lParam);
    wi.fDoResize = fTrue;
    break;

  /* All or part of the window needs to be redrawn. Will do so later. */
  case WM_PAINT:
    wi.fDoRedraw = fTrue;
    break;

  default:
    return DefWindowProc(hwnd, wMsg, wParam, lParam);
  }
  return fFalse;
}
#endif


#ifdef ISG
/* This routine opens up and initializes a window and prepares it to be */
/* drawn upon, and gets various information about the display, too.     */

void BeginX()
{
#ifdef X11
  gi.disp = XOpenDisplay(gs.szDisplay);
  if (gi.disp == NULL) {
    PrintError("Can't open display.");
    Terminate(tcFatal);
  }
  gi.screen = DefaultScreen(gi.disp);
  bg = BlackPixel(gi.disp, gi.screen);
  fg = WhitePixel(gi.disp, gi.screen);
  hint.x = gi.xOffset; hint.y = gi.yOffset;
  hint.width = gs.xWin; hint.height = gs.yWin;
  hint.min_width = BITMAPX1; hint.min_height = BITMAPY1;
  hint.max_width = BITMAPX;  hint.max_height = BITMAPY;
  hint.flags = PPosition | PSize | PMaxSize | PMinSize;
  gi.depth = DefaultDepth(gi.disp, gi.screen);
  if (gi.depth < 5) {
    gi.fMono = fTrue;      /* Is this a monochrome display? */
    gs.fColor = fFalse;
  }
  gi.root = RootWindow(gi.disp, gi.screen);
  if (gs.fRoot)
    gi.wind = gi.root;     /* If -XB in effect, we'll use the root window. */
  else
    gi.wind = XCreateSimpleWindow(gi.disp, DefaultRootWindow(gi.disp),
      hint.x, hint.y, hint.width, hint.height, 5, fg, bg);
  gi.pmap = XCreatePixmap(gi.disp, gi.wind, gs.xWin, gs.yWin, gi.depth);
  gi.icon = XCreateBitmapFromData(gi.disp, DefaultRootWindow(gi.disp),
    (char *)icon_bits, icon_width, icon_height);
  if (!gs.fRoot)
    XSetStandardProperties(gi.disp, gi.wind, szAppName, szAppName, gi.icon,
      (char **)xkey, 0, &hint);

  /* We have two graphics workareas. One is what the user currently sees in */
  /* the window, and the other is what we are currently drawing on. When    */
  /* done, we can quickly copy this to the viewport for a smooth look.      */

  gi.gc = XCreateGC(gi.disp, gi.wind, 0, 0);
  XSetGraphicsExposures(gi.disp, gi.gc, 0);
  gi.pmgc = XCreateGC(gi.disp, gi.wind, 0, 0);
  InitColorsX();                                  /* Go set up colors. */
  if (!gs.fRoot)
    XSelectInput(gi.disp, gi.wind, KeyPressMask | StructureNotifyMask |
      ExposureMask | ButtonPressMask | ButtonReleaseMask | ButtonMotionMask);
  XMapRaised(gi.disp, gi.wind);
  XSync(gi.disp, 0);
  XFillRectangle(gi.disp, gi.pmap, gi.pmgc, 0, 0, gs.xWin, gs.yWin);
#endif /* X11 */

#ifdef WIN
  if (wi.fChartWindow && (wi.xClient != gs.xWin ||
    wi.yClient != gs.yWin) && wi.hdcPrint == hdcNil)
    ResizeWindowToChart();
  gi.xOffset = NMultDiv(wi.xClient - gs.xWin, wi.xScroll, nScrollDiv);
  gi.yOffset = NMultDiv(wi.yClient - gs.yWin, wi.yScroll, nScrollDiv);
  SetWindowOrg(wi.hdc, -gi.xOffset, -gi.yOffset);
  SetWindowExt(wi.hdc, wi.xClient, wi.yClient);
  SetMapMode(wi.hdc, MM_ANISOTROPIC);
  SelectObject(wi.hdc, GetStockObject(NULL_PEN));
  SelectObject(wi.hdc, GetStockObject(NULL_BRUSH));
  if (!gs.fJetTrail || wi.hdcPrint != hdcNil)
    PatBlt(wi.hdc, -gi.xOffset, -gi.yOffset, wi.xClient, wi.yClient,
      gs.fInverse ? WHITENESS : BLACKNESS);
  InitColorsX();
#endif /* WIN */

#ifdef MACG
  MaxApplZone();
  InitGraf(&thePort);
  InitFonts();
  FlushEvents(everyEvent, 0);
  InitWindows();
  InitMenus();
  TEInit();
  InitDialogs(0L);
  InitCursor();

  gi.rcDrag = screenBits.bounds;
  gi.rcBounds.left = 20;
  gi.rcBounds.top = 20 + GetMBarHeight();
  gi.rcBounds.right = gi.rcBounds.left + gs.xWin;
  gi.rcBounds.bottom = gi.rcBounds.top + gs.yWin;
  gi.wpAst = NewCWindow(0L, &gi.rcBounds, "\p" szAppNameCore " "
    szVersionCore, true, noGrowDocProc, (WindowPtr)-1L, true, 0);
  SetPort(gi.wpAst);
  InitColorsX();
#endif /* MACG */

#ifdef WCLI
  WNDCLASS wndclass;
  if (!wi.fWndclass) {
    wi.fWndclass = fTrue;
    wi.hinst = GetModuleHandle(NULL);
    ClearB((pbyte)&wndclass, sizeof(WNDCLASS));
    wndclass.style = CS_HREDRAW | CS_VREDRAW | CS_BYTEALIGNWINDOW;
    wndclass.lpfnWndProc = WndProcWCLI;
    wndclass.hInstance = wi.hinst;
    wndclass.hCursor = LoadCursor((HINSTANCE)NULL, IDC_ARROW);
    wndclass.hbrBackground = (HBRUSH)(COLOR_WINDOW+1);
    wndclass.lpszClassName = szAppName;
    if (!RegisterClass(&wndclass)) {
      PrintError("The window class could not be registered.");
      Terminate(tcFatal);
    }
  }
  wi.hwndMain = CreateWindow(
    szAppName,
    szAppNameCore " " szVersionCore,
    WS_CAPTION |
    WS_SYSMENU |
    WS_MINIMIZEBOX |
    WS_MAXIMIZEBOX |
    WS_THICKFRAME |
    WS_VSCROLL |
    WS_HSCROLL |
    WS_CLIPCHILDREN |
    WS_OVERLAPPED,
    CW_USEDEFAULT, CW_USEDEFAULT,
    CW_USEDEFAULT, CW_USEDEFAULT,
    (HWND)NULL,
    (HMENU)NULL,
    wi.hinst,
    (LPSTR)NULL);
  if (wi.hwndMain == (HWND)NULL) {
    PrintError("The window could not be created.");
    Terminate(tcFatal);
  }
  wi.hwnd = wi.hwndMain;
  ResizeWindowToChart();
  ShowWindow(wi.hwndMain, SW_SHOW);
  ShowScrollBar(wi.hwnd, SB_BOTH, fFalse);
  gi.xOffset = gi.yOffset = 0;
  InitColorsX();
#endif /* WCLI */
}


/* Add a certain amount of time to the hour/day/month/year quantity that    */
/* defines a particular chart. This is used by the chart animation feature. */
/* We can add or subtract anywhere from 1 to 9 seconds, minutes, hours,     */
/* days, months, years, decades, centuries, or millenia in any one call.    */
/* This is mainly just addition to the appropriate quantity, but we have    */
/* to check for overflows, e.g. Dec 30 + 3 days = Jan 2 of Current year + 1 */

void AddTime(CI *pci, int mode, int toadd)
{
  int d, h;
  real m;

  if (!FBetween(mode, 1, 9))
    mode = 4;

  h = (int)RFloor(pci->tim);
  m = RFract(pci->tim)*60.0;
  if (m < 60.0 && m + 1.0/rLarge >= 60.0)  /* Avoid roundoff error. */
    m = 60.0;
  if (mode == 1)
    m += 1.0/60.0*(real)toadd;         /* Add seconds. */
  else if (mode == 2)
    m += (real)toadd;                  /* Add minutes. */

  /* Add hours, either naturally or if minute value overflowed. */

  if (m >= 60.0 || m < 0.0 || mode == 3) {
    if (m >= 60.0) {
      m -= 60.0; toadd = NSgn(toadd);
    } else if (m < 0.0) {
      m += 60.0; toadd = NSgn(toadd);
    }
    h += toadd;
  }

  /* Add days, either naturally or if hour value overflowed. */

  if (h >= 24 || h < 0 || mode == 4) {
    if (h >= 24) {
      h -= 24; toadd = NSgn(toadd);
    } else if (h < 0) {
      h += 24; toadd = NSgn(toadd);
    }
    pci->day = AddDay(pci->mon, pci->day, pci->yea, toadd);
  }

  /* Add months, either naturally or if day value overflowed. */

  d = DayInMonth(pci->mon, pci->yea);
  if (pci->day > d || pci->day < 1 || mode == 5) {
    if (pci->day > d) {
      pci->day -= d; toadd = NSgn(toadd);
    } else if (pci->day < 1) {
      pci->day += DayInMonth(Mod12(pci->mon - 1), pci->yea);
      toadd = NSgn(toadd);
    }
    pci->mon += toadd;
  }

  /* Add years, either naturally or if month value overflowed. */

  if (pci->mon > 12 || pci->mon < 1 || mode == 6) {
    if (pci->mon > 12) {
      pci->mon -= 12; toadd = NSgn(toadd);
    } else if (pci->mon < 1) {
      pci->mon += 12; toadd = NSgn(toadd);
    }
    pci->yea += toadd;
  }
  if (mode == 7)
    pci->yea += 10 * toadd;      /* Add decades.   */
  else if (mode == 8)
    pci->yea += 100 * toadd;     /* Add centuries. */
  else if (mode == 9)
    pci->yea += 1000 * toadd;    /* Add millenia.  */
  pci->tim = (real)h + m/60.0;   /* Recalibrate hour time. */
}


/* Animate the current chart based on the given values indicating how much  */
/* to update by. We update and recast the current chart info appropriately. */
/* Note animation mode for comparison charts will update the second chart.  */

void Animate(int mode, int toadd)
{
  if (((gi.nMode == gAstroGraph || gi.nMode == gSphere) && gs.fAnimMap) ||
    ((gi.nMode == gWorldMap || gi.nMode == gGlobe || gi.nMode == gPolar) &&
    (gs.fAlt || gs.fAnimMap))) {
    gs.rRot += (real)toadd;
    if (gs.rRot >= rDegMax)     /* For animating map displays, add */
      gs.rRot -= rDegMax;       /* in appropriate degree value.    */
    else if (gs.rRot < 0.0)
      gs.rRot += rDegMax;
    return;
  }

  mode = NAbs(mode);
  if (mode >= 10) {
#ifdef TIME
    /* For the continuous chart update to present moment */
    /* animation mode, go get whatever time it is now.   */
    FInputData(szNowCore);
#else
    mode = 1;
    goto LNotNow;
#endif
  } else {  /* Otherwise add on appropriate time vector to chart info. */
#ifndef TIME
LNotNow:
#endif
    if (us.nRel == rcDual || us.nRel <= rcTransit)
      ciCore = ciTwin;
    else if (us.fProgress || us.fTransit || us.fTransitInf || us.fTransitGra)
      ciCore = ciTran;
    else
      ciCore = ciMain;
    AddTime(&ciCore, mode, toadd);
  }
  if (us.nRel == rcDual || us.nRel <= rcTransit) {
    ciTwin = ciCore;
    ciCore = ciMain;
  } else if (us.fProgress || us.fTransit || us.fTransitInf || us.fTransitGra) {
    ciTran = ciCore;
    ciCore = ciMain;
    if (us.fProgress)
      is.JDp = MdytszToJulian(MonT, DayT, YeaT, TimT, us.dstDef, us.zonDef);
  } else
    ciMain = ciCore;
  if (us.nRel)
    CastRelation();
  else
    CastChart(fTrue);
}


#ifndef WIN
/* This routine exits graphics mode, prompts the user for a set of command */
/* switches, processes them, and returns to the previous graphics with the */
/* new settings in effect, allowing one to change most any setting without */
/* having to lose their graphics state or fall way back to a -Q loop.      */

void CommandLineX()
{
  char szCommandLine[cchSzMax], *rgsz[MAXSWITCHES];
  int argc, fT, fPause = fFalse;

  ciCore = ciMain;
  fT = us.fLoop; us.fLoop = fTrue;
  argc = NPromptSwitches(szCommandLine, rgsz);
  is.cchRow = 0;
  is.fSzInteract = fTrue;
  if (!FProcessSwitches(argc, rgsz))
    fPause = fTrue;
  else {
    is.fMult = fFalse;
    FPrintTables();
    if (is.fMult) {
      ClearB((pbyte)&us.fCredit,
        (int)((pbyte)&us.fLoop - (pbyte)&us.fCredit));
      fPause = fTrue;
    }
  }

  is.fSzInteract = fFalse;
  us.fLoop = fT;
  ciMain = ciCore;
#ifndef WCLI
  BeginX();
#else
  InitColorsX();
#endif
}
#endif /* WIN */


/* Given two chart size values, adjust them such that the chart will look */
/* "square". We round the higher value down and check certain conditions. */

void SquareX(int *x, int *y, flag fForce)
{
  if (!fForce && !fSquare)    /* Unless we want to force a square, realize */
    return;                   /* that some charts look better rectangular. */
  if (*x > *y)
    *x = *y;
  else
    *y = *x;
  if (fSidebar)      /* Take into account chart's sidebar, if any. */
    *x += xSideT;
}


#ifdef WINANY
/* Change the pixel size of the window so its internal drawable area is the */
/* dimensions of the current graphics chart. Both the upper left and lower  */
/* right corners of the window may change depending on the scroll position. */

void ResizeWindowToChart()
{
  HDC hdc;
  RECT rcOld, rcCli, rcNew;
  POINT pt;
  int xScr, yScr;

  if (!us.fGraphics)
    return;
  if (gs.xWin == 0)
    gs.xWin = DEFAULTX;
  if (gs.yWin == 0)
    gs.yWin = DEFAULTY;
  hdc = GetDC(wi.hwnd);
  xScr = GetDeviceCaps(hdc, HORZRES);
  yScr = GetDeviceCaps(hdc, VERTRES);
  ReleaseDC(wi.hwnd, hdc);
  GetWindowRect(wi.hwnd, &rcOld);
  GetClientRect(wi.hwnd, &rcCli);
  pt.x = pt.y = 0;
  ClientToScreen(wi.hwnd, &pt);
  rcNew.left = rcOld.left + gi.xOffset;
  rcNew.top  = rcOld.top  + gi.yOffset;
  rcNew.right = rcNew.left + gs.xWin + (gi.nMode == 0 ? SIDESIZE : 0) +
    (rcOld.right - rcOld.left - rcCli.right);
  rcNew.bottom = rcNew.top + gs.yWin +
    (rcOld.bottom - rcOld.top - rcCli.bottom);
  if (rcNew.right > xScr)
    OffsetRect(&rcNew, xScr - rcNew.right, 0);
  if (rcNew.bottom > yScr)
    OffsetRect(&rcNew, 0, yScr - rcNew.bottom);
  if (rcNew.left < 0)
    OffsetRect(&rcNew, -rcNew.left, 0);
  if (rcNew.top < 0)
    OffsetRect(&rcNew, 0, -rcNew.top);
  MoveWindow(wi.hwnd, rcNew.left, rcNew.top,
    rcNew.right - rcNew.left, rcNew.bottom - rcNew.top, fTrue);
}
#endif


#ifndef WIN
/* This routine gets called after graphics are brought up and displayed     */
/* on the screen. It loops, processing key presses, mouse clicks, etc, that */
/* the window receives, until the user specifies they want to exit program. */

void InteractX()
{
#ifdef X11
  char sz[cchSzDef];
  XEvent xevent;
  KeySym keysym;
#endif
#ifdef MACG
  EventRecord erCur;
  WindowPtr wpCur;
  int wc, fEvent;
#endif
#ifdef WCLI
  HBITMAP hbmp, hbmpOld;
  HDC hdcWin;
  PAINTSTRUCT ps;
  MSG msg;
#endif
  int fResize = fFalse, fRedraw = fTrue, fNoChart = fFalse,
    fBreak = fFalse, fPause = fFalse, fCast = fFalse, xcorner = 7,
    mousex = -1, mousey = -1, buttonx = -1, buttony = -1, dir = 1,
    length, key, i;
  KI coldrw = gi.kiLite;

  neg(gs.nAnim);
  while (!fBreak) {
    gi.nScale = gs.nScale/100;
    gi.nScaleText = gs.nScaleText/100;
#ifdef WCLI
    if (wi.fDoResize) {
      wi.fDoResize = fFalse;
      fResize = fTrue;
    }
    if (wi.fDoRedraw) {
      wi.fDoRedraw = fFalse;
      fRedraw = fTrue;
    }
#endif

    /* Some chart windows, like the world maps and aspect grids, should */
    /* always be a certain size, so correct if a resize was attempted.  */

    if (fMap) {
      length = nDegMax*gi.nScale;
      if (gs.xWin != length) {
        gs.xWin = length;
        fResize = fTrue;
      }
      length = nDegHalf*gi.nScale;
      if (gs.yWin != length) {
        gs.yWin = length;
        fResize = fTrue;
      }
    } else if (gi.nMode == gGrid) {
      length = (gi.nGridCell + (us.nRel <= rcDual))*CELLSIZE*gi.nScale + 1;
      if (gs.xWin != length) {
        gs.xWin = length;
        fResize = fTrue;
      }
      if (gs.yWin != length) {
        gs.yWin = length;
        fResize = fTrue;
      }

    /* Make sure the window isn't too large or too small. */

    } else {
      if (gs.fKeepSquare && fSquare) {
        if (fSidebar)
          gs.xWin -= SIDESIZE * gi.nScaleText;
        if (gs.xWin != gs.yWin) {
          i = Min(gs.xWin, gs.yWin);
          i = Max(i, BITMAPX1);
          gs.xWin = gs.yWin = i;
          fResize = fTrue;
        }
        if (fSidebar)
          gs.xWin += SIDESIZE * gi.nScaleText;
      }
      if (gs.xWin < BITMAPX1) {
        gs.xWin = BITMAPX1;
        fResize = fTrue;
      } else if (gs.xWin > BITMAPX) {
        gs.xWin = BITMAPX;
        fResize = fTrue;
      }
      if (gs.yWin < BITMAPY1) {
        gs.yWin = BITMAPY1;
        fResize = fTrue;
      } else if (gs.yWin > BITMAPY) {
        gs.yWin = BITMAPY;
        fResize = fTrue;
      }
    }

    /* If in animation mode, ensure we are in the flicker free resolution. */

    if (gs.nAnim < 0)
      neg(gs.nAnim);

    /* Physically resize window if we've changed the size parameters. */

    if (fResize) {
      fResize = fFalse;
#ifdef X11
      XResizeWindow(gi.disp, gi.wind, gs.xWin, gs.yWin);
      XFreePixmap(gi.disp, gi.pmap);
      gi.pmap = XCreatePixmap(gi.disp, gi.wind, gs.xWin, gs.yWin, gi.depth);
#endif
#ifdef MACG
      SizeWindow(gi.wpAst, gs.xWin, gs.yWin, fTrue);
#endif
#ifdef WCLI
      ResizeWindowToChart();
#endif
      fRedraw = fTrue;
    }

    /* Recast chart if the chart information has changed any. */

    if (fCast) {
      fCast = fFalse;
      ciCore = ciMain;
      if (us.nRel)
        CastRelation();
      else
        CastChart(fTrue);
      fRedraw = fTrue;
    }
    if (gs.nAnim && !fPause)
      fRedraw = fTrue;

    /* Update the screen if anything has changed since last time around. */

    if (fRedraw && (!fPause || gs.nAnim)) {
      fRedraw = fFalse;

      /* If we're in animation mode, change the chart info appropriately. */

      if (gs.nAnim && !fPause)
        Animate(gs.nAnim, dir);

      /* Clear the screen and set up a buffer to draw in. */

#ifdef X11
      if (!gs.fJetTrail)
        XFillRectangle(gi.disp, gi.pmap, gi.pmgc, 0, 0, gs.xWin, gs.yWin);
#endif
#ifdef MACG
      SetPort(gi.wpAst);
      InvalRect(&gi.wpAst->portRect);
      BeginUpdate(gi.wpAst);
      EraseRect(&gi.wpAst->portRect);
#endif
#ifdef WCLI
      InvalidateRect(wi.hwnd, NULL, fFalse);
      ClearB((pbyte)&ps, sizeof(PAINTSTRUCT));
      hdcWin = BeginPaint(wi.hwnd, &ps);
      wi.hdc = CreateCompatibleDC(hdcWin);
      hbmp = CreateCompatibleBitmap(hdcWin, wi.xClient, wi.yClient);
      hbmpOld = (HBITMAP)SelectObject(wi.hdc, hbmp);
      if (gs.fJetTrail)
        BitBlt(wi.hdc, 0, 0, wi.xClient, wi.yClient, hdcWin, 0, 0, SRCCOPY);
      SetWindowOrg(wi.hdc, 0, 0);
      SetWindowExt(wi.hdc, gs.xWin, gs.yWin);
      SetMapMode(wi.hdc, MM_ANISOTROPIC);
      SelectObject(wi.hdc, GetStockObject(NULL_PEN));
      SelectObject(wi.hdc, GetStockObject(NULL_BRUSH));
      if (!gs.fJetTrail)
        PatBlt(wi.hdc, 0, 0, gs.xWin, gs.yWin,
          gs.fInverse ? WHITENESS : BLACKNESS);
#endif
      if (fNoChart)
        fNoChart = fFalse;
      else
        DrawChartX();

      /* Make the drawn chart visible in the current screen buffer. */

#ifdef X11
      XSync(gi.disp, 0);
      XCopyArea(gi.disp, gi.pmap, gi.wind, gi.gc,
        0, 0, gs.xWin, gs.yWin, 0, 0);
#endif
#ifdef MACG
      EndUpdate(gi.wpAst);
#endif
#ifdef WCLI
      BitBlt(hdcWin, 0, 0, wi.xClient, wi.yClient,
        wi.hdc, 0, 0, SRCCOPY);
      SelectObject(wi.hdc, hbmpOld);
      DeleteObject(hbmp);
      DeleteDC(wi.hdc);
      EndPaint(wi.hwnd, &ps);
#endif
    }  /* if */

    /* Now process what's on the event queue, i.e. any keys pressed, etc. */

#ifdef X11
    if (XEventsQueued(gi.disp, QueuedAfterFlush /*QueuedAfterReading*/) ||
      !gs.nAnim || fPause) {
      XNextEvent(gi.disp, &xevent);

      /* Restore what's on window if a part of it gets uncovered. */

      if (xevent.type == Expose && xevent.xexpose.count == 0) {
        XSync(gi.disp, 0);
        XCopyArea(gi.disp, gi.pmap, gi.wind, gi.gc,
          0, 0, gs.xWin, gs.yWin, 0, 0);
      }
      switch (xevent.type) {

      /* Check for a manual resize of window by user. */

      case ConfigureNotify:
        gs.xWin = xevent.xconfigure.width;
        gs.yWin = xevent.xconfigure.height;
        XFreePixmap(gi.disp, gi.pmap);
        gi.pmap = XCreatePixmap(gi.disp, gi.wind, gs.xWin, gs.yWin, gi.depth);
        fRedraw = fTrue;
        break;
      case MappingNotify:
        XRefreshKeyboardMapping((XMappingEvent *)&xevent);
        break;

      /* Process any mouse buttons the user pressed. */

      case ButtonPress:
        mousex = xevent.xbutton.x; mousey = xevent.xbutton.y;
        if (xevent.xbutton.button == Button1) {
          DrawColor(gi.kiLite);
          DrawPoint(mousex, mousey);
          XSync(gi.disp, 0);
          XCopyArea(gi.disp, gi.pmap, gi.wind, gi.gc,
            0, 0, gs.xWin, gs.yWin, 0, 0);
        } else if (xevent.xbutton.button == Button2 && (gi.nMode ==
          gAstroGraph || gi.nMode == gWorldMap) && gs.rRot == 0.0) {
          Lon = rDegHalf -
            (real)(xevent.xbutton.x-1)/(real)(gs.xWin-2)*rDegMax;
          Lat = rDegQuad -
            (real)(xevent.xbutton.y-1)/(real)(gs.yWin-2)*181.0;
          sprintf(sz, "Mouse is at %s.", SzLocation(Lon, Lat));
          PrintProgress(sz);
        } else if (xevent.xbutton.button == Button3)
          fBreak = fTrue;
        break;

      /* Check for user dragging any of the mouse buttons across window. */

      case MotionNotify:
        DrawColor(coldrw);
        DrawLine(mousex, mousey, xevent.xbutton.x, xevent.xbutton.y);
        XSync(gi.disp, 0);
        XCopyArea(gi.disp, gi.pmap, gi.wind, gi.gc,
          0, 0, gs.xWin, gs.yWin, 0, 0);
        mousex = xevent.xbutton.x; mousey = xevent.xbutton.y;
        break;

      /* Process any keys user pressed in window. */

      case KeyPress:
        length = XLookupString((XKeyEvent *)&xevent, xkey, 10, &keysym, 0);
        if (length == 1) {
          key = xkey[0];
#endif /* X11 */

#ifdef MACG
      HiliteMenu(0);
      SystemTask();
      fEvent = GetNextEvent(everyEvent, &erCur);
      if (fEvent) {
        switch (erCur.what) {
        case mouseDown:
          wc = FindWindow(erCur.where, &wpCur);
          switch (wc) {
          case inSysWindow:
            SystemClick(&erCur, wpCur);
            break;
          case inMenuBar:
            MenuSelect(erCur.where);
            break;
          case inDrag:
            if (wpCur == gi.wpAst)
              DragWindow(gi.wpAst, erCur.where, &gi.rcDrag);
            break;
          case inContent:
            if (wpCur == gi.wpAst && wpCur != FrontWindow())
              SelectWindow(gi.wpAst);
            break;
          case inGoAway:
            if (wpCur == gi.wpAst && TrackGoAway(gi.wpAst, erCur.where))
              HideWindow(gi.wpAst);
            break;
          }
          break;
        case updateEvt:
          /*fRedraw = fTrue;*/
          break;
        case keyDown:
        case autoKey:
          key = (char)(erCur.message & charCodeMask);
#endif /* MACG */

#ifdef WCLI
      if (PeekMessage(&msg, (HWND)NULL, 0, 0, PM_REMOVE)) {
        TranslateMessage(&msg);
        if (LOWORD(msg.message) != WM_CHAR) {
          switch (LOWORD(msg.message)) {
          case WM_SIZE:
            wi.xClient = gs.xWin = LOWORD(msg.lParam);
            wi.yClient = gs.yWin = HIWORD(msg.lParam);
            fResize = fTrue;
            break;
          case WM_PAINT:
            fRedraw = fTrue;
            break;
          default: 
            DispatchMessage(&msg);
          }
        } else {
          key = (int)msg.wParam;
#endif /* WCLI */

          switch (key) {
          case ' ':
            fRedraw = fTrue;
            break;
          case 'p':
            inv(fPause);
            break;
          case 'r':
            neg(dir);
            break;
          case 'x':
            inv(gs.fInverse);
            InitColorsX();
            fRedraw = fTrue;
            break;
          case 'm':
            if (!gi.fMono) {
              inv(gs.fColor);
              InitColorsX();
              fRedraw = fTrue;
            }
            break;
          case 'B':
#ifdef X11
            XSetWindowBackgroundPixmap(gi.disp, gi.root, gi.pmap);
            XClearWindow(gi.disp, gi.root);
#endif
            break;
          case 't':
            inv(gs.fText);
            fRedraw = fTrue;
            break;
          case 'i':
            inv(gs.fAlt);
            fRedraw = fTrue;
            break;
          case 'b':
            inv(gs.fBorder);
            fRedraw = fTrue;
            break;
          case 'l':
            inv(gs.fLabel);
            fRedraw = fTrue;
            break;
          case 'k':
            inv(gs.fLabelAsp);
            fRedraw = fTrue;
            break;
          case 'j':
            inv(gs.fJetTrail);
            break;
          case '<':
            if (gs.nScale > 100) {
              gs.nScale -= 100;
              fResize = fTrue;
            }
            break;
          case '>':
            if (gs.nScale < MAXSCALE) {
              gs.nScale += 100;
              fResize = fTrue;
            }
            break;
          case '[':
            if (gs.rTilt > -rDegQuad) {
              gs.rTilt = gs.rTilt > -rDegQuad ?
                gs.rTilt-(real)NAbs(dir) : -rDegQuad;
              fRedraw = fTrue;
            }
            break;
          case ']':
            if (gs.rTilt < rDegQuad) {
              gs.rTilt = gs.rTilt < rDegQuad ?
                gs.rTilt+(real)NAbs(dir) : rDegQuad;
              fRedraw = fTrue;
            }
            break;
          case '{':
            gs.rRot += (real)NAbs(dir);
            if (gs.rRot >= rDegMax)
              gs.rRot -= rDegMax;
            fRedraw = fTrue;
            break;
          case '}':
            gs.rRot -= (real)NAbs(dir);
            if (gs.rRot < 0.0)
              gs.rRot += rDegMax;
            fRedraw = fTrue;
            break;
          case 'Q':
            SquareX(&gs.xWin, &gs.yWin, fTrue);
            fResize = fTrue;
            break;
          case 'R':
            for (i = oChi; i <= oVes; i++)
              inv(ignore[i]);
            for (i = oSou; i <= oEP; i++)
              inv(ignore[i]);
            fCast = fTrue;
            break;
          case 'C':
            inv(us.fCusp);
            for (i = cuspLo; i <= cuspHi; i++)
              ignore[i] = !us.fCusp || !ignore[i];
            fCast = fTrue;
            break;
          case 'u':
            inv(us.fUranian);
            for (i = uranLo; i <= uranHi; i++)
              ignore[i] = !us.fUranian || !ignore[i];
            fCast = fTrue;
            break;
          case 'U':
            us.nStar = !us.nStar;
            for (i = starLo; i <= starHi; i++)
              ignore[i] = !us.nStar || !ignore[i];
            fCast = fTrue;
            break;
          case 'c':
            us.nRel = us.nRel ? rcNone : rcDual;
            fCast = fTrue;
            break;
          case 's':
            inv(us.fSidereal);
            fCast = fTrue;
            break;
          case 'h':
            inv(us.objCenter);
            fCast = fTrue;
            break;
          case 'a':
            inv(us.fHouse3D);
            fCast = fTrue;
            break;
          case 'g':
            inv(us.fDecan);
            fCast = fTrue;
            break;
          case 'f':
            inv(us.fFlip);
            fCast = fTrue;
            break;
          case 'z':
            inv(us.fVedic);
            fRedraw = fTrue;
            break;
          case 'y':
            inv(us.fNavamsa);
            fCast = fTrue;
            break;
          case '+':
            Animate(gs.nAnim, NAbs(dir));
            fCast = fTrue;
            break;
          case '-':
            Animate(gs.nAnim, -NAbs(dir));
            fCast = fTrue;
            break;
          case 'o':
            ciSave = ciMain;
            break;
          case 'O':
            ciMain = ciSave;
            fCast = fTrue;
            break;
#ifdef TIME
          case 'n':
            FInputData(szNowCore);
            ciMain = ciCore;
            fCast = fTrue;
            break;
#endif
          case 'N':                     /* The continuous update animation. */
            gs.nAnim = gs.nAnim ? 0 : -10;
            break;

          /* These are the nine different "add time to chart" animations. */
          case '!': gs.nAnim = -1; break;
          case '@': gs.nAnim = -2; break;
          case '#': gs.nAnim = -3; break;
          case '$': gs.nAnim = -4; break;
          case '%': gs.nAnim = -5; break;
          case '^': gs.nAnim = -6; break;
          case '&': gs.nAnim = -7; break;
          case '*': gs.nAnim = -8; break;
          case '(': gs.nAnim = -9; break;

          /* Should we go switch to a new chart type? */
          case 'V': gi.nMode = gWheel;      fRedraw = fTrue; break;
          case 'A': gi.nMode = gGrid;       fRedraw = fTrue; break;
          case 'Z': gi.nMode = gHorizon;    fRedraw = fTrue; break;
          case 'S': gi.nMode = gOrbit;      fRedraw = fTrue; break;
          case 'M': gi.nMode = gSector;     fRedraw = fTrue; break;
          case 'K': gi.nMode = gCalendar;   fRedraw = fTrue; break;
          case 'J': gi.nMode = gDisposit;   fRedraw = fTrue; break;
          case 'L': gi.nMode = gAstroGraph; fRedraw = fTrue; break;
          case 'E': gi.nMode = gEphemeris;  fRedraw = fTrue; break;
          case 'X': gi.nMode = gSphere;     fRedraw = fTrue; break;
          case 'W': gi.nMode = gWorldMap;   fRedraw = fTrue; break;
          case 'G': gi.nMode = gGlobe;      fRedraw = fTrue; break;
          case 'P': gi.nMode = gPolar;      fRedraw = fTrue; break;
#ifdef BIORHYTHM
          case 'Y':            /* Should we switch to biorhythm chart? */
            us.nRel = rcBiorhythm;
            gi.nMode = gBiorhythm;
            fCast = fTrue;
            break;
#endif
#ifdef CONSTEL
          case 'F':
            if (gi.nMode != gSphere &&
              gi.nMode != gGlobe && gi.nMode != gPolar)
              gi.nMode = gWorldMap;
            inv(gs.fConstel);
            fRedraw = fTrue;
            break;
#endif
          case 'e':
            inv(gs.fEquator);
            fRedraw = fTrue;
            break;
          case 'd':
            inv(gs.fHouseExtra);
            fRedraw = fTrue;
            break;
          case '0':
            inv(us.fPrimeVert);
            inv(us.fCalendarYear);
            inv(us.nEphemYears);
            inv(gs.fMollewide);
            gi.nMode = (gi.nMode == gWheel ? gHouse :
              (gi.nMode == gHouse ? gWheel : gi.nMode));
            fRedraw = fTrue;
            break;
          case 'v': case 'H': case '?':
            length = us.nScrollRow;
            us.nScrollRow = 0;
            if (key == 'v')
              ChartListing();
            else
              DisplayKeysX();
            us.nScrollRow = length;
            break;
          case chReturn:
            CommandLineX();
            fResize = fCast = fTrue;
            break;
          case chDelete:
            fRedraw = fNoChart = fTrue;
            break;
          case 'z'-'`': coldrw = kBlack;   break;
          case 'e'-'`': coldrw = kMaroon;  break;
          case 'f'-'`': coldrw = kDkGreen; break;
          case 'o'-'`': coldrw = kOrange;  break;
          case 'n'-'`': coldrw = kDkBlue;  break;
          case 'u'-'`': coldrw = kPurple;  break;
          case 'k'-'`': coldrw = kDkCyan;  break;
          case 'l'-'`': coldrw = kLtGray;  break;
          case 'd'-'`': coldrw = kDkGray;  break;
          case 'r'-'`': coldrw = kRed;     break;
          case 'g'-'`': coldrw = kGreen;   break;
          case 'y'-'`': coldrw = kYellow;  break;
          case 'b'-'`': coldrw = kBlue;    break;
          case 'v'-'`': coldrw = kMagenta; break;
          case 'j'-'`': coldrw = kCyan;    break;
          case 'a'-'`': coldrw = kWhite;   break;
          case 'q': case chEscape: case chBreak:
            fBreak = fTrue;
            break;
          default:
            if (key > '0' && key <= '9') {
              /* Process numbers 1..9 signifying animation rate. */
              dir = (dir > 0 ? 1 : -1)*(key-'0');
              break;
            } else if (FBetween(key, 201, 248)) {
              is.fSzInteract = fTrue;
              if (szMacro[key-201]) {
                FProcessCommandLine(szMacro[key-201]);
                fResize = fCast = fTrue;
              }
              is.fSzInteract = fFalse;
              break;
            }
            putchar(chBell);    /* Any key not bound will sound a beep. */
          }  /* switch */
        }  /* if */
#ifdef X11
      default:
        ;
      }  /* switch */
    }  /* if */
#endif
#ifdef MACG
    }  /* if */
#endif
#ifdef WCLI
    }  /* if */
#endif
  }  /* while */
}


/* This is called right before program termination to get rid of the window. */

void EndX()
{
#ifdef X11
  XFreeGC(gi.disp, gi.gc);
  XFreeGC(gi.disp, gi.pmgc);
  XFreePixmap(gi.disp, gi.pmap);
  XDestroyWindow(gi.disp, gi.wind);
  XCloseDisplay(gi.disp);
#endif
#ifdef MACG
  DisposeWindow(gi.wpAst);
#endif
#ifdef WCLI
  UnregisterClass(szAppName, wi.hinst);
#endif
}
#endif /* ISG */
#endif /* WIN */


/*
******************************************************************************
** Main Graphics Processing.
******************************************************************************
*/

/* Process one command line switch passed to the program dealing with the    */
/* graphics features. This is just like the processing of each switch in the */
/* main program, however here each switch has been prefixed with an 'X'.     */

int NProcessSwitchesX(int argc, char **argv, int pos,
  flag fOr, flag fAnd, flag fNot)
{
  int darg = 0, i, j;
  real rT;
  char ch1, ch2;

  ch1 = argv[0][pos+1];
  ch2 = ch1 == chNull ? chNull : argv[0][pos+2];
  switch (argv[0][pos]) {
  case chNull:
    break;

  case 'b':
    if (us.fNoWrite || is.fSzInteract) {
      ErrorArgv("Xb");
      return tcError;
    }
    ch1 = ChCap(ch1);
    if (FValidBmpmode(ch1))
      gs.chBmpMode = ch1;
    gs.ft = FSwitchF2(gs.ft == ftBmp) * ftBmp;
    break;

#ifdef PS
  case 'p':
    if (us.fNoWrite || is.fSzInteract) {
      ErrorArgv("Xp");
      return tcError;
    }
    gs.ft = FSwitchF2(gs.ft == ftPS) * ftPS;
    gs.fPSComplete = (ch1 == '0');
    break;
#endif

#ifdef META
  case 'M':
    if (FBetween(ch1, '1', '4')) {
      i = (ch1 - '0') + (ch2 == '0');
      if (argc <= i) {
        ErrorArgc("XM");
        return tcError;
      }
      for (j = 1; j <= i; j++)
        szWheelX[(ch2 == '0' && j >= i) ? 0 : j] = SzPersist(argv[j]);
      darg += i;
      break;
    }
    if (us.fNoWrite || is.fSzInteract) {
      ErrorArgv("XM");
      return tcError;
    }
    if (ch1 == '0')
      SwitchF(gs.fFont);
    gs.ft = FSwitchF2(gs.ft == ftWmf) * ftWmf;
    break;
#endif

#ifdef WIRE
  case '3':
    if (us.fNoWrite || is.fSzInteract) {
      ErrorArgv("X3");
      return tcError;
    }
    gs.ft = FSwitchF2(gs.ft == ftWire) * ftWire;
    break;
#endif

  case 'o':
    if (us.fNoWrite || is.fSzInteract) {
      ErrorArgv("Xo");
      return tcError;
    }
    if (argc <= 1) {
      ErrorArgc("Xo");
      return tcError;
    }
    if (gs.ft == ftNone)
      gs.ft = ftBmp;
    gi.szFileOut = SzPersist(argv[1]);
    darg++;
    break;

#ifdef X11
  case 'B':
    if (is.fSzInteract) {
      ErrorArgv("XB");
      return tcError;
    }
    SwitchF(gs.fRoot);
    break;
#endif

  case 'm':
    SwitchF(gs.fColor);
    break;

  case 'r':
    SwitchF(gs.fInverse);
    break;

  case 'w':
    if (argc <= 1) {
      ErrorArgc("Xw");
      return tcError;
    }
    i = atoi(argv[1]);
    if (argc > 2 && ((j = atoi(argv[2])) || argv[2][0] == '0')) {
      argc--; argv++;
      darg++;
    } else
      j = i;
    if (!FValidGraphx(i)) {
      ErrorValN("Xw", i);
      return tcError;
    }
    if (!FValidGraphy(j)) {
      ErrorValN("Xw", j);
      return tcError;
    }
    gs.xWin = i; gs.yWin = j;
    darg++;
    break;

  case 's':
    if (argc <= 1) {
      ErrorArgc("Xs");
      return tcError;
    }
    i = atoi(argv[1]);
    if (i < 100)
      i *= 100;
    if (!FValidScale(i)) {
      ErrorValN("Xs", i);
      return tcError;
    }
    gs.nScale = i;
    gi.nScale = gs.nScale/100;   /* So -XM2 works */
    darg++;
    break;

  case 'S':
    if (argc <= 1) {
      ErrorArgc("XS");
      return tcError;
    }
    i = atoi(argv[1]);
    if (i < 100)
      i *= 100;
    if (!FValidScale(i)) {
      ErrorValN("XS", i);
      return tcError;
    }
    gs.nScaleText = i;
    darg++;
    break;

  case 'Q':
    SwitchF(gs.fKeepSquare);
    break;

  case 'i':
    SwitchF(gs.fAlt);
    break;

  case 't':
    SwitchF(gs.fText);
    break;

  case 'u':
    SwitchF(gs.fBorder);
    break;

  case 'l':
    SwitchF(gs.fLabel);
    break;

  case 'A':
    SwitchF(gs.fLabelAsp);
    break;

  case 'j':
    SwitchF(gs.fJetTrail);
    break;

  case 'e':
    SwitchF(gs.fEquator);
    break;

  case 'U':
    SwitchF(gs.fAllStar);
    if (FBetween(ch1, '0', '3'))
      gs.nAllStar = (ch1 - '0');
    break;

  case 'E':
    if (argc <= 2) {
      ErrorArgc("XE");
      return tcError;
    }
    if (FBetween(ch1, '0', '3'))
      gs.nAstLabel = (ch1 - '0');
    gs.nAstLo = atoi(argv[1]);
    gs.nAstHi = atoi(argv[2]);
    darg += 2;
    break;

#ifdef ATLAS
  case 'L':
    SwitchF(gs.fLabelCity);
    if (FBetween(ch1, '1', '4'))
      gs.nLabelCity = (ch1 - '0');
    break;
#endif

  case 'C':
    SwitchF(gs.fHouseExtra);
    break;

  case '1':
    if (fAnd) {
      gs.objLeft = 0;
      break;
    }
    if (argc <= 1) {
      ErrorArgc("X1");
      return tcError;
    }
    i = NParseSz(argv[1], pmObject);
    if (!FItem(i)) {
      ErrorValN("X1", i);
      return tcError;
    }
    gs.objLeft = i+1;
    darg++;
    break;

  case '2':
    if (fAnd) {
      gs.objLeft = 0;
      break;
    }
    if (argc <= 1) {
      ErrorArgc("X2");
      return tcError;
    }
    i = NParseSz(argv[1], pmObject);
    if (!FItem(i)) {
      ErrorValN("X2", i);
      return tcError;
    }
    gs.objLeft = -i-1;
    darg++;
    break;

#ifdef X11
  case 'd':
    if (is.fSzInteract) {
      ErrorArgv("Xd");
      return tcError;
    }
    if (argc <= 1) {
      ErrorArgc("Xd");
      return tcError;
    }
    gs.szDisplay = SzPersist(argv[1]);
    darg++;
    break;
#endif

  case 'X':
    if (argc > 1 && ((rT = atof(argv[1])) || argv[1][0] == '0')) {
      darg++;
      if (!FValidRotation(rT)) {
        ErrorValR("XX", rT);
        return tcError;
      }
      gs.rRot = rT;
      if (argc > 2 && ((rT = atof(argv[2])) || argv[2][0] == '0')) {
        darg++;
        if (!FValidTilt(rT)) {
          ErrorValR("XX", rT);
          return tcError;
        }
        gs.rTilt = rT;
      }
    }
    gi.nMode = gSphere;
    if (ch1 == '0')
      SwitchF(gs.fSouth);
    break;

  case 'W':
    if (argc > 1 && ((rT = atof(argv[1])) || argv[1][0] == '0')) {
      darg++;
      if (!FValidRotation(rT)) {
        ErrorValR("XW", rT);
        return tcError;
      }
      gs.rRot = rT;
    }
    gi.nMode = gWorldMap;
    if (ch1 == '0')
      SwitchF(gs.fMollewide);
    is.fHaveInfo |= gs.fAlt;
    break;

  case 'G':
    if (argc > 1 && ((rT = atof(argv[1])) || argv[1][0] == '0')) {
      darg++;
      if (!FValidRotation(rT)) {
        ErrorValR("XG", rT);
        return tcError;
      }
      gs.rRot = rT;
      if (argc > 2 && ((rT = atof(argv[2])) || argv[2][0] == '0')) {
        darg++;
        if (!FValidTilt(rT)) {
          ErrorValR("XG", rT);
          return tcError;
        }
        gs.rTilt = rT;
      }
    }
    gi.nMode = gGlobe;
    if (ch1 == '0')
      SwitchF(gs.fSouth);
    is.fHaveInfo |= gs.fAlt;
    break;

  case 'P':
    if (argc > 1 && ((rT = atoi(argv[1])) || argv[1][0] == '0')) {
      darg++;
      if (!FValidRotation(rT)) {
        ErrorValR("XP", rT);
        return tcError;
      }
    } else
      rT = 0.0;
    gs.rRot = rT;
    gi.nMode = gPolar;
    if (ch1 == '0')
      SwitchF(gs.fSouth);
    else if (ch1 == 'v')
      SwitchF(gs.fPrintMap);
    is.fHaveInfo |= gs.fAlt;
    break;

#ifdef CONSTEL
  case 'F':
    if (!fMap && gi.nMode != gGlobe && gi.nMode != gPolar)
      gi.nMode = gWorldMap;
    inv(gs.fConstel);
    is.fHaveInfo |= gs.fAlt;
    break;
#endif

#ifdef ISG
  case 'n':
    if (argc > 1 && (i = atoi(argv[1])))
      darg++;
    else
      i = 10;
    if (i < 1 || i > 10) {
      ErrorValN("Xn", i);
      return tcError;
    }
    gs.nAnim = fAnd ? -i : i;
    break;

  case 'N':
    SwitchF(gs.fAnimMap);
    break;
#endif

  default:
    ErrorSwitch(argv[0]);
    return tcError;
  }
  /* 'darg' contains the value to be added to argc when we return. */
  return darg;
}


/* Process one command line switch passed to the program dealing with more  */
/* obscure graphics options. This is structured very much like the function */
/* NProcessSwitchesX(), except here each switch begins with 'YX'.           */

int NProcessSwitchesRareX(int argc, char **argv, int pos,
  flag fOr, flag fAnd, flag fNot)
{
  int darg = 0, i;
  char ch1, *pch = NULL;

  ch1 = argv[0][pos+1];
  switch (argv[0][pos]) {

  /* No longer implemented, but still skip 2 parameters and do nothing for */
  /* compatibility with old astrolog.as files.                             */
  case chNull:
    if (argc <= 2) {
      ErrorArgc("YX");
      return tcError;
    }
    darg += 2;
    break;

  case 'G':
    if (argc <= 1) {
      ErrorArgc("YXG");
      return tcError;
    }
    i = atoi(argv[1]);
    if (!FValidGlyphs(i)) {
      ErrorValN("YXG", i);
      return tcError;
    }
    gs.nGlyphs = i;
    darg++;
    break;

  case 'D':
    if (argc <= 3 - (ch1 == '1')) {
      ErrorArgc("YXD");
      return tcError;
    }
    i = NParseSz(argv[1], pmObject);
    if (!FItem(i)) {
      ErrorValN("YXD", i);
      return tcError;
    }
    szDrawObject[i] = argv[2][0] ? SzPersist(argv[2]) : szDrawObjectDef[i];
    szDrawObject2[i] = (ch1 == '1' ? "" : (argv[3][0] ? SzPersist(argv[3]) :
      szDrawObjectDef2[i]));
    darg += 3 - (ch1 == '1');
    break;

  case 'A':
    if (argc <= 3 - (ch1 == '1')) {
      ErrorArgc("YXA");
      return tcError;
    }
    i = NParseSz(argv[1], pmAspect);
    if (!FAspect(i)) {
      ErrorValN("YXA", i);
      return tcError;
    }
    szDrawAspect[i] = argv[2][0] ? SzPersist(argv[2]) : szDrawAspectDef[i];
    szDrawAspect2[i] = (ch1 == '1' ? "" : (argv[3][0] ? SzPersist(argv[3]) :
      szDrawAspectDef2[i]));
    darg += 3 - (ch1 == '1');
    break;

  case 'v':
    if (argc <= 1) {
      ErrorArgc("YXv");
      return tcError;
    }
    i = atoi(argv[1]);
    if (!FValidDecaType(i)) {
      ErrorValN("YXv", i);
      return tcError;
    }
    gs.nDecaType = i;
    darg++;
    if (argc > 2 && FNumCh(argv[2][0])) {
      i = atoi(argv[2]);
      if (!FValidDecaSize(i)) {
        ErrorValN("YXv", i);
        return tcError;
      }
      gs.nDecaSize = i;
      darg++;
      if (argc > 3 && FNumCh(argv[3][0])) {
        i = atoi(argv[3]);
        if (!FValidDecaLine(i)) {
          ErrorValN("YXv", i);
          return tcError;
        }
        gs.nDecaLine = i;
        darg++;
      }
    }
    break;

  case 'g':
    if (argc <= 1) {
      ErrorArgc("YXg");
      return tcError;
    }
    i = atoi(argv[1]);
    if (!FValidGrid(i)) {
      ErrorValN("YXg", i);
      return tcError;
    }
    gs.nGridCell = i;
    darg++;
    break;

  case 'S':
    if (argc <= 1) {
      ErrorArgc("YXS");
      return tcError;
    }
    gs.rspace = atof(argv[1]);
    darg++;
    break;

  case 'j':
    if (argc <= 1) {
      ErrorArgc("YXj");
      return tcError;
    }
    i = atoi(argv[1]);
    if (ch1 != '0') {
      gs.cspace = i;
      if (gi.rgspace != NULL) {
        DeallocateP(gi.rgspace);
        gi.rgspace = NULL;
      }
      gi.cspace = gi.ispace = 0;
    } else
      gs.zspace = i;
    darg++;
    break;

  case '7':
    if (argc <= 1) {
      ErrorArgc("YX7");
      return tcError;
    }
    i = atoi(argv[1]);
    if (!FValidEsoteric(i)) {
      ErrorValN("YX7", i);
      return tcError;
    }
    gs.nRayWidth = i;
    darg++;
    break;

  case 'k':
    SwitchF(gs.fColorSign);
    if (ch1 == '0')
      SwitchF(gs.fColorHouse);
    break;

  case 'K':
    if (argc <= 2) {
      ErrorArgc("YXK");
      return tcError;
    }
    i = NParseSz(argv[1], pmColor);
    if (!FValidColor(i)) {
      ErrorValN("YXK", i);
      return tcError;
    }
    rgbbmp[i] = NParseSz(argv[2], pmRGB);
    darg += 2;
    break;

  case 'e':
    SwitchF(gs.fEcliptic);
    break;

  case 'a':
    if (argc <= 1) {
      ErrorArgc("YXa");
      return tcError;
    }
    gs.nDashMax = atoi(argv[1]);
    darg++;
    break;

#ifdef SWISS
  case 'U':
    if (argc <= 2) {
      ErrorArgc("YXU");
      return tcError;
    }
    gs.szStarsLin = SzPersist(argv[1]);
    gs.szStarsLnk = SzPersist(argv[2]);
    gi.cStarsLin = *gs.szStarsLin != chNull;
    for (pch = gs.szStarsLin; *pch; pch++)
      if (*pch == chSep || *pch == chSep2)
        gi.cStarsLin++;
    if (gi.rges != NULL) {
      DeallocateP(gi.rges);
      gi.rges = NULL;
    }
    gi.rges = (ES *)PAllocate(gi.cStarsLin * sizeof(ES), "extra stars");
    if (gi.rges == NULL)
      gi.cStarsLin = 0;
    darg++;
    break;
#endif

  case 'f':
    if (argc <= 1) {
      ErrorArgc("YXf");
      return tcError;
    }
    gs.fFont = atoi(argv[1]);
    darg++;
    break;

#ifdef PS
  case 'p':
    if (ch1 == '0') {
      if (argc <= 2) {
        ErrorArgc("YXp0");
        return tcError;
      }
      gs.xInch = atof(argv[1]);
      gs.yInch = atof(argv[2]);
      darg += 2;
      break;
    }
    if (argc <= 1) {
      ErrorArgc("YXp");
      return tcError;
    }
    gs.nOrient = atoi(argv[1]);
    darg++;
    break;
#endif

  default:
    ErrorSwitch(argv[0]);
    return tcError;
  }
  /* 'darg' contains the value to be added to argc when we return. */
  return darg;
}


/* Figure out what graphics mode a graphics chart should be generated in, */
/* based on various command switches in effect, e.g. -L combined with -X, */
/* -g combined with -X, and so on.                                        */

int DetectGraphicsChartMode()
{
  int nMode;

  if (us.fWheel)                     nMode = gHouse;
  else if (us.fGrid || us.fMidpoint) nMode = gGrid;
  else if (us.fHorizon)              nMode = gHorizon;
  else if (us.fOrbit)                nMode = gOrbit;
  else if (us.fSector)               nMode = gSector;
  else if (us.fInfluence)            nMode = gDisposit;
  else if (us.fEsoteric)             nMode = gEsoteric;
  else if (us.fAstroGraph)           nMode = gAstroGraph;
  else if (us.fCalendar)             nMode = gCalendar;
  else if (us.fEphemeris)            nMode = gEphemeris;
  else if (us.fInDayGra)             nMode = gTraTraGra;
  else if (us.fTransitGra)           nMode = gTraNatGra;
  else if (us.nRel == rcBiorhythm)   nMode = gBiorhythm;
  else                               nMode = gWheel;

  return nMode;
}


/* This is the main interface to all the graphics features. This routine     */
/* is called from the main program if any of the -X switches were specified, */
/* and it sets up for and goes and generates the appropriate graphics chart. */
/* Return fTrue if successfull, or fFalse if some non-fatal error occurred.  */

flag FActionX()
{
  int i, n;

  gi.fFile = (gs.ft != ftNone);
#ifdef PS
  gi.fEps = !gs.fPSComplete;
#endif

  if (gi.nMode == 0)
    gi.nMode = DetectGraphicsChartMode();

  /* Determine the pixel size the graphics chart is to have. */

  if (gi.nMode == gGrid) {
    if (us.nRel <= rcDual && us.fMidpoint && !us.fAspList)
      us.fGridMidpoint = fTrue;
    if (gs.nGridCell > 0)
      gi.nGridCell = gs.nGridCell;
    else
      for (gi.nGridCell = i = 0; i <= cObj; i++)
        gi.nGridCell += FProper(i);
    gs.xWin = gs.yWin =
      (gi.nGridCell + (us.nRel <= rcDual))*CELLSIZE*gi.nScale + 1;
  } else if (gs.fKeepSquare && fSquare) {
#ifdef WIN
    if (wi.hdcPrint == hdcNil) {
      if (fSidebar)
        gs.xWin -= SIDESIZE * gi.nScaleText;
#endif
      n = Min(gs.xWin, gs.yWin);
      gs.xWin = gs.yWin = n;
#ifdef WIN
      if (fSidebar)
        gs.xWin += SIDESIZE * gi.nScaleText;
    }
#endif
  } else if (fMap) {
    gs.xWin = nDegMax*gi.nScale;
    gs.yWin = nDegHalf*gi.nScale;
  }
#ifdef WIN
  if (fSidebar)
    gs.xWin -= SIDESIZE;
#endif
  gi.nScaleT = gs.ft == ftPS ? PSMUL : (gs.ft == ftWmf ? METAMUL :
    (gs.ft == ftWire ? WIREMUL : 1));
#ifdef WIN
  if (wi.hdcPrint != hdcNil)
    gi.nScaleT = METAMUL;
#endif

  if (gi.fFile) {
    if (gs.xWin == 0)
      gs.xWin = DEFAULTX;
    if (gs.yWin == 0)
      gs.yWin = DEFAULTY;
    if (fSidebar)
      gs.xWin += SIDESIZE;
    if (gs.xWin > BITMAPX)
      gs.xWin = BITMAPX;
    if (gs.yWin > BITMAPY)
      gs.yWin = BITMAPY;
    BeginFileX();
    if (gs.ft == ftBmp) {
      gi.cbBmpRow = (gs.xWin + 1) >> 1;
      if ((gi.bm = PAllocate(gi.cbBmpRow * gs.yWin, NULL)) == NULL)
        return fFalse;
    }
#ifdef PS
    else if (gs.ft == ftPS)
      PsBegin();
#endif
#ifdef META
    else if (gs.ft == ftWmf) {
      for (gi.cbMeta = MAXMETA; gi.cbMeta > 0 &&
        (gi.bm = PAllocate(gi.cbMeta, NULL)) == NULL;
        gi.cbMeta -= MAXMETA/8)
        PrintWarning("Attempting to get maximum memory for metafile.");
      if (gi.cbMeta <= 0)
        return fFalse;
      gs.xWin   *= METAMUL;  /* Increase chart sizes and scales behind the */
      gs.yWin   *= METAMUL;  /* scenes to make graphics look smoother.     */
      gs.nScale *= METAMUL;
    }
#endif
#ifdef WIRE
    else {
      gs.xWin   *= WIREMUL;  /* Increase chart sizes and scales behind the */
      gs.yWin   *= WIREMUL;  /* scenes to make graphics look smoother.     */
      gs.nScale *= WIREMUL;
      for (gi.cbWire = MAXMETA; gi.cbWire > 0 &&
        (gi.bm = PAllocate(gi.cbWire, NULL)) == NULL;
        gi.cbWire -= MAXMETA/8)
        PrintWarning("Attempting to get maximum memory for wireframe.");
      if (gi.cbWire <= 0)
        return fFalse;
      gi.pwWireCur = (word *)gi.bm;
      gi.cWire = gi.zDefault = 0;
      gi.kiInFile = -1;
    }
#endif
    InitColorsX();
  }
#ifdef ISG
  else {
    if (gs.xWin == 0 || gs.yWin == 0) {
      if (gs.xWin == 0)
        gs.xWin = DEFAULTX;
      if (gs.yWin == 0)
        gs.yWin = DEFAULTY;
      SquareX(&gs.xWin, &gs.yWin, fFalse);
    } else if (fSidebar)
      gs.xWin += SIDESIZE;
    BeginX();
  }
#endif /* ISG */

  if (gi.fFile || gs.fRoot)    /* Go draw the graphic chart. */
    DrawChartX();
  if (gi.fFile) {    /* Write bitmap to file if in that mode. */
    EndFileX();
    if (gs.ft == ftBmp || gs.ft == ftWmf || gs.ft == ftWire) {
      DeallocateP(gi.bm);
      gi.bm = NULL;
    }
  }
#ifdef ISG
  else {
#ifdef X11
    if (gs.fRoot) {                                         /* Process -XB. */
      XSetWindowBackgroundPixmap(gi.disp, gi.root, gi.pmap);
      XClearWindow(gi.disp, gi.root);

      /* If -Xn in effect with -XB, then enter infinite loop where we */
      /* calculate and animate chart, displaying on the root window.  */
      while (gs.nAnim) {
        Animate(gs.nAnim, 1);
        if (!gs.fJetTrail)
          XFillRectangle(gi.disp, gi.pmap, gi.pmgc, 0, 0, gs.xWin, gs.yWin);
        DrawChartX();
        XSetWindowBackgroundPixmap(gi.disp, gi.root, gi.pmap);
        XClearWindow(gi.disp, gi.root);
      }
    } else
#endif
#ifndef WIN
      InteractX();    /* Window's up; process commands given to window now. */
    EndX();
#else
    DrawChartX();
#endif
  }
#endif /* ISG */
  return fTrue;
}
#endif /* GRAPH */

/* xscreen.cpp */
